Get the Ultimate Golf Simulator Comparison Tool

Get the Ultimate Golf Simulator Comparison Tool
Get the Ultimate Golf Simulator Comparison Tool

Tuesday, January 31, 2017

#startup #humor https://t.co/qEaJCjjjxb


This Toddler's Tantrum Is How We All Feel After Missing A Putt https://t.co/az1gMgyGqe #golf https://t.co/EG5I4WRK9u


Trends and Observations from the 2017 PGA Show

Post image for Trends and Observations from the 2017 PGA Show

While the daily propaganda blasts from show organizers might have you believe otherwise, I’m here to tell you that the 2017 PGA Show was an absolute sloth. With noticeably light traffic in the aisles and plenty of open space (both on the show floor and the range at demo day), 2017’s easily qualifies as the most depressing PGA Show during my time in the industry.

Take it for whatever it’s worth, but several of my media colleagues (and others I’ve spoken with from inside the industry) are in complete agreement. Call it a worse show on the heels of a bad show on the heels of a not so good show.

Bottom line; whatever the actual state of the equipment industry and the game of golf itself, the PGA Show is broken. It’s trending downward, and without some serious intervention, I suspect that’s going to continue until we reach the point where there is no point.

A sample size of one, but inside MyGolfSpy we’re already discussing whether or not we should attend the 2018 show.

That said, the show wasn’t all bad. It still provides an opportunity to pulse-check the industry and gauge where the companies that power it are headed. So with all that buildup out of the way, here is my take on the show, the trends, and other things on which you should keep an eye.

TaylorMade Won the PGA Show

tiger-tm

Maybe that’s overstating it just a bit, but if you’re looking for the defining moment of the 2017 PGA Show, it was TaylorMade’s announcement that it had signed Tiger Woods to a long-term deal. Tiger will eventually play 13 TaylorMade clubs. For now, it’s just metalwoods in the bag, as the company willfully admits it’s going to take some time to develop irons and wedges that are suitable to the notoriously difficult Mr. Woods.

The announcement at 8:30 AM of Day 1 of the indoor session overshadowed absolutely everything else at the show. Lost in the Tiger news; Michelle Wie signed with Callaway, PING released its Sigma G line of putters, and Titleist formally announced a new generation of Pro V1 and Pro V1x golf balls.

All good stuff, but none of it escaped Tiger’s shadow.

A quick aside overheard inside the TaylorMade booth; Tiger tweeted his half of the announcement a bit early, which forced TM CEO David Abeles, who was in a meeting at the time, to step on the gas a bit in making the company’s official statement.

Tour players….amirite?

The TaylorMade/adidas situation is getting weird

And speaking of TaylorMade…while the PGA Show booths were side by side, for the first time I can recall, you couldn’t walk directly from the adidas booth to the TaylorMade booth. We’re talking a firm or at least a semi-firm barrier between the two brands.

While future ownership of the TaylorMade brands remains unsettled, it appears to be operating as an adidias company in name only. I would describe the current relationship between the two brands as married, but sleeping in separate bedrooms.

Metaphorically speaking, both sides are holding it together for the sake of the children, but there is a clear division between the two brands. While the addition of Tiger Woods is inarguably good for the TaylorMade brand, it has also served to expand the growing internal rift.

Two Nike apparel staffers are now part of the TaylorMade staff, and that’s an issue. I can assure you that the prominent display of the Nike Swoosh inside the TaylorMade booth (and within the company’s marketing efforts) isn’t sitting well with some on the adidas Golf side of the business.

The New Srixon

srixon2

Call it something to keep an eye on, and it’s nothing I can quantify, but there was a decidedly different vibe coming from the Cleveland/Srixon booth. The fresh attitude likely stems from the significant amount of turnover within the company over the last year, but I’d be remiss not to point out the positive energy.

Granted, some of that probably comes from the free beer, but it’s perhaps noteworthy that Srixon threw the best booth party at the show...perhaps the best since TaylorMade was riding high.

The company is excited about it clubs – irons in particular – and its new ball. Whether or not any of that resonates with the consumer remains to be seen.

Is this real momentum, or unrealistic enthusiasm? As it often does, time will tell.

The USGA…Grumble, Grumble

wilson-triton

The consensus within the industry is that the USGA’s smackdown of the Wilson Triton driver was total bullshit. The thinking is it was petty, ill-tempered revenge for Wilson having the audacity to put a product on the shelf without the expressed consent of golf’s fun police. God forbid, right?

The same is largely true with respect to the flap over Bryson DeChambeau’s putter. Again…asserting power for no other reason than because it can. My sense is that a majority of companies have grown sick of the USGA’s authoritarian policing of the equipment space.

Don’t expect anything to change, however. Most appear afraid of going toe to toe with the USGA and, I believe, all would prefer a competitor be first to wrestle with the agency.

Most are pissed off, but none are willing to actually do anything about it.

It’s Callaway’s World

epic-booth

It’s tough to get an absolute read on traffic through the Callaway booth given its strategic location in the epicenter of the PGA Show floor. Sooner or later, even if it’s by accident, everyone walks through the Callaway booth. It’s unavoidable.

That said, my sense was that Callaway had a most excellent show. Granted, the Michelle Wie announcement was overshadowed by Tiger. But traffic was steady, and no single product garnered more chatter than Epic.

Callaway believes it has something special, and I’m on record with my belief that it will be the best-selling driver of 2017…and that makes it all the more odd that Callaway had but a single launch monitor on the downwind range during demo day.

How good is Epic? I still have absolutely no idea.

Callaway Taking on Cameron?

If you didn’t take the acquisition of Toulon Design as a sign that Callaway was serious about trying to own the putter market, the addition of David Mills and the T.P. Mills brand might change your mind.

The market gap between Callaway (Odyssey/Toulon) and Titleist (Scotty Cameron) is much narrower than many believe and Callaway has proven it can erase large deficits in relatively short time.

Between Odyssey, Toulon, and T.P. Mills, Callaway can offer quality everywhere from the entry-level to premium markets, and with demonstrated best-in-class marketing, coupled with a changing ball market that will require more of Titleist’s attention, Callaway has a legitimate shot of taking over #1 in the category.

A Shift In the Launch Monitor Category

foresight

Like Callaway, Foresight Sports had an outstanding show. The new GCQuad drew plenty of attention and made Foresight’s booth one of the most trafficked of the week. Sufficed to say word is spreading about the GCQuad and what it can offer instructors and fitters in terms of accuracy and consistency.

The company is going to be making a huge push into the market while putting significantly more effort into promoting what it sees as a clear technological advantage over radar-based units.

Big things are being promised.

We’re taking a wait and see approach, but with top instructors (“Trackman Guys” whose names you know) taking a long look at the technology, an industry-wide shift from radar to cameras is well within the realm of possibility.

Tyson Lamb is the Real Deal

Young Mr. Lamb spent his show in the Table Rock booth (formerly occupied by Scotty Cameron) where his putters sold briskly for upwards of $5000 each. If it wasn’t obvious already, there’s more than enough evidence to suggest that Tyson Lamb has arrived as the next big thing in the high-end putter market.

Collectors already know his name and his work, and several OEMs are taking notice too. Opportunities are beginning to present themselves, and if he’s inclined to do so, Tyson could jump to the mainstream at any time.

But is milling for the man really how Lamb wants to spend his time?

Arccos Is Pulling Away

Arccos_CourseAnalyzer_Media_1_1024x1024

It was a slow year for digital tech at the PGA Show, and frankly, some of what was on display, wasn’t nearly ready for prime time, but Arccos was the clear exception.

With the announcement of its Course Analyzer product in partnership with Microsoft, Arccos established itself as a tier (maybe two) above anything else on the market right now. And with the kind of horsepower Microsoft brings to the table, it’s unlikely anyone else is going to be able to keep pace.

If you’re looking for a round/stat tracker, Arccos is clearly the technology leader right now, but guys, seriously, can we get the phone out of the pocket and maybe make it easier to mark the actual location of the flagstick?

Figuring Out North America

honma

Perhaps the oddest trend at the PGA Show was the number of Asian companies who told us they’re trying to figure out North America. Honma, Yamaha, Epon, and others all used exactly that phrase while describing their efforts to penetrate the US Market.

Frankly, I’m not sure what there is to figure out. The market is oversaturated, and without a targeted approach to advertising and something truly special in the lineup (and I didn’t see that from anyone), opportunities to kick the doors open are limited.

I wish everybody luck, but I don’t see anyone breaking through in any meaningful way.

Where’d All the Shaft Companies Go?

KBS, Nippon, and Oban had booths. Graphite Design had a spot on the indoor range. Fujikura and Veylix had conference rooms. Others, like True Temper, Aldila, Matrix, MRC, UST, and upstart VA Shafts had no official presence inside the convention center.

Some pretty basic cost/benefit math has shown these guys that it makes much more sense to hold meetings in a hotel room, the lobby, or one of the remote and otherwise abandoned corners of the show floor than it does to overspend on a booth.

It’s Time to Shake Up the Show

showfloor

The hottest trend at the PGA Show over the last several years is companies abandoning the PGA Show. Many are struggling to find the proverbial R on their I. For a growing list of companies, attending the show is just bad business.

Take the previously mentioned shaft guys, toss in Nike (even the shoe guys), Bridgestone, SKLZ, Mizuno, and a growing list of small to mid-sized companies, and plenty of names you know are choosing to skip the show, while others like Wilson, Fujikura, and Yonex have traded floor space for conference rooms. Some even double or triple up in those rooms to further save.

Part of the blame can be placed on Reed Exhibitions. Costs continue to rise, and Reed is anything but accommodating when it comes to handling requests to downsize booths. When the choice is overpaying or being exiled to one of many poorly trafficked corners of the floor, many are choosing to bail entirely. Good for them.

Last year a representative of one company told me that it cost them $6000 just to have his merchandise moved from the loading dock to the show floor and back again. $30 a day trash can rentals, more for chairs…companies are being nickeled and dimed, and plenty have had enough.

For many inside the industry, there’s nearly nothing to lose by skipping the show. That’s evident by the dwindling number of fitness products, training aids, colleges, travel agencies, and even big name companies that take up space on the show floor each year.

It’s also worth noting that the timing of the show no longer works with the cadence of the industry. Come the end of January, nothing is new, orders have been placed, and there’s very little in actual business to be done.

My thinking is that the fall apparel show in Vegas should be expanded to include everything and the January show should be dropped entirely. It’s an idea that will likely be considered blasphemy for an industry that’s often overly content with doing things the way they’ve always been done (because that’s how they’ve always been done). Without an industry-wide resurgence (hold your breath for that), the current model isn’t sustainable.

If nothing else, Vegas, by virtue of the fact that it’s Vegas (baby), would likely draw bigger crowds.

What I Like About the Show

None of this should suggest I don’t find value in the show. 2017 was a down year for products (and floor traffic), but the value in the show remains in the opportunity it creates to build and maintain relationships. It provides an annual opportunity to catch up with old friends, and with Harry Arnett. As travel budgets decline and the number of media events dwindle, this aspect of the show is becoming increasing more important.

The companies we cover get their chances to hold me accountable and make me answer for every rock that I’ve thrown over the last 12 months. It gives me the opportunity to clear up any misunderstandings and set the record straight on the rocks I didn’t throw.

The problem is that, for many – us included – while you can’t always put a value on relationships, airfare, hotel, rental cars and other associated costs are easily quantifiable, and as the costs begin to pile up, the PGA Show, in its current form, makes less and less sense.

The show needs fixing, but golf loves its status quo, so I suspect nothing will change anytime soon.



Golf: Sergio Garcia rewards Twitter super fan by hiring him as caddie at pro-am of British Masters in September (ESPN) …


Monday, January 30, 2017

Waste Management Phoenix Open - February 2–5 #golf


Club Building 101: A Guide to the Things that Matter

Post image for Club Building 101: A Guide to the Things that Matter

 By: Larry Baldridge, Workshop Manager for True Spec Golf

In our last article, we talked about all of the factors involved in a well-executed clubfitting process. But that's just one-half of the battle.

Once a proper fitting is performed, it's up to the build team to assemble and achieve the desired specs the golfer performed best with. This is no easy task.

It takes a well trained and experienced technician to build up what I call "A Balanced Set of Clubs". I'm not talking about balance in the traditional sense - what I mean is that every club is built to an exact specification with extremely tight tolerances that produce a consistency in the set makeup.

There are a number of factors that a club builder must address to create a balanced set of clubs, as follows:

  • Grip
  • Shaft
  • Loft and Lie
  • Club Length
  • Swing Weight

As you can probably guess, no one factor is more important than another if you are serious about building a balanced set of clubs.

Grip Size and WeightSterling - Grip Size

An experienced builder looks for consistency for an installed grip size as well as sorting the grips so that all of the grips are the same weight. This helps contribute to a consistent swingweight when the build is complete. Grip sizing is extremely important, and unfortunately, this is typically the most overlooked spec.

The majority of golfers do not realize what size grips they are playing throughout their set. Terms I hear out there: “standard”, “midsize”, or I love this one, “just add two wraps”. Grips are no different than a lie angle or CPM; they are a measurement, a number. There is a very specific way a builder measures a grip. The figure to the right shows grips sizings for both men and women.

A shaft’s O.D. (outside diameter) plays a huge part in determining what size grip will be installed. The way we accommodate different butt OD’s in a set is sometimes adding more or less tape under the grip.  In some cases, we may not use any tape or stretch the grip down the shaft a certain amount to achieve the desired size. In a lot of cases, we will use different ID’s, Inside Diameter grips to achieve the desired size. Some grips come with different ID’s in the same model.

A good builder recognizes this and knows how to match up the sizing throughout the golfers set.

Shaft

shaft-lab-3

Not every shaft is perfectly round or the same in diameter size. The tolerances in shaft diameters or butt O.D.’s usually differ +- .002” to .004”.  I have seen some shafts differ as much as .007” to .008”. Weight sorting shafts is also a must in achieving a consistent swing weight as well as getting very good outcomes in frequency once the build is finished. The builder has more control dictating the final CPM of a shaft using a parallel tip shaft, which requires tip trimming and butt trimming.

Taper tip shafts do not require tip trimming, only butt trimming, so weight sorting each shaft is especially important for this type of shaft.

A great builder looks for a consistency in weight to help assist in creating a progression in the slope and gradient for the CPM's (Cycles Per Minute) of the iron set as well as wedges. As far as woods and hybrids, a builder knows how to manipulate the flex or CPM's of a shaft, so the golfer receives a club that is identical to what they tested during the fitting.

Loft and Lie

Clubmaking-3

Once the builder is ready to address the loft and lie angles of the irons, they can find challenges in adjusting these specs. Cast clubs, in a lot of cases, can be difficult to adjust and the builder has to be very careful in the technique to ensure there is no damage to the clubhead. It’s been said over the years that cast clubs are not bendable. This is 100% not the case. All cast clubs can be bent, some more than others. 

Forged clubs are generally much easier to adjust, but the builder also needs to be careful not to create marks on the club head with their bending technique. Forged clubs are usually a much softer metal, and a good builder knows how to accommodate these types of clubs. What we typically look for is a consistent progression in lie angle and loft angle of the set, based on what the fitter prescribed for the golfer. A very specific machine is used for this adjustment called an Angle Machine or Loft and Lie Machine.

Club Length

Clubmaking-4

The length of a club or set of clubs should also fall in a progression, generally differing a ½” between each iron and a ¼” in the wedges. However, this may not always be the case for every golfer we fit. Sometimes a fitter will recommend the golfer’s wedges be the same length or that they follow the progression of a ½” all the way down to the lob wedge. 

When it comes time to build to these specs, a good builder knows how to properly weigh out the club heads so that the swing weights are consistent to what was prescribed. Length plays a huge part in determining what a swing weight will be as well as what the final CPM is for the shaft. If this is not addressed properly, the result will be a very inconsistent set of clubs. This can really hurt a golfer in achieving a consistent ball flight.

Swing Weight

Clubmaking-2

Swing weights should also be consistent throughout the set, whether the fitter or builder want the same swing weight for every club or they want to have a MOI matched set. Depending on the golfer's swing, a fitter may prescribe a typical swing weight for their clubs, but in a lot of cases, the fitter knows to introduce a heavier or lighter swing weight in order to get a better result in ball flight.

A trained eye knows when it is best to introduce swing weights that differ from what we as humans and golfers have felt for a very long time. This is where the fitter and builder work closely together to ensure that the customer is testing a set of clubs that can be duplicated for the final build.   

The Final Product

I firmly believe that if a golfer has a balanced set of golf clubs to match up to a repeatable swing, the golfer will be much more consistent with better misses and a tighter dispersion, ultimately resulting in lower scores.



Waste Management Phoenix Open - February 2–5

Waste Management Phoenix Open - TPC Scottsdale - Scottsdale, Arizona

7,266 yards - Par 71

Course Guide

Course Map PDF

Past 5 Winners:

2016: Hideki Matsuyama
2015: Brooks Koepka
2014: Kevin Stadler
2013: Phil Mickelson
2012: Kyle Stanley

Player List Click Here



Submitted January 30, 2017 at 12:37PM by barkhorse http://ift.tt/2jn9nwk

Waste Management Phoenix Open - February 2–5 via /r/ProGolf https://t.co/CHJxCLIn4D


New Golf GIF


New Golf GIF golf, body via http://ift.tt/2kLArBN

Sunday, January 29, 2017

Golf Video: Jon Rahm drains 60-foot eagle putt to lock up victory at Farmers Insurance Open (ESPN) https://t.co/6AQ26P3J1m #golf


Golf: Jon Rahm (-13) earns first career PGA Tour win as he shoots 4th-round 65 at Farmers Insurance Open; Phil Mickelson (-7) T-14 (ESPN) …


Boost Your Social Life and Game: Benefits of Joining Private Golf Clubs

Private golf clubs are great investments for golfers of all skill levels. They help foster an appreciation for the game and provide a fun social atmosphere to meet fellow enthusiasts.

Saturday, January 28, 2017

Golf: Patrick Rodgers and Brandt Snedeker (-9) share lead at Farmers Insurance Open after third round; Phil Mickelson (-5) T-18 (ESPN) …


DeChambeau's hectic week ends with MC | Golf Channel #golf


DeChambeau's hectic week ends with MC | Golf Channel via /r/ProGolf https://t.co/e7cYRy6OcR


DeChambeau's hectic week ends with MC | Golf Channel

http://ift.tt/2kbYZXB

Submitted January 28, 2017 at 02:30PM by yardstickgolf http://ift.tt/2jBxPsa

https://t.co/HTxZSlGnix https://t.co/HTxZSlGnix #golf


DeChambeau's hectic week ends with MC | Golf Channel

http://ift.tt/2kbYZXB
from Yardstick Golf http://ift.tt/2kbYZXB
via IFTTT

Friday, January 27, 2017

Golf: Justin Rose (-8) leads by one stroke after 2nd round of Farmers Insurance Open; Phil Mickelson (-1) T-48 (ESPN) …


"I made so many dumb mistakes out there" - Tiger Woods frustrated after missing cut at Farmers Insurance Open (ESPN) …


Golf: Jason Day (+3) and Dustin Johnson (+2) both expected to miss cut at Farmers Insurance Open (ESPN) https://t.co/6AQ26P3J1m #golf


Golf: Tiger Woods (+4) expected to miss cut at Farmers Insurance Open after 2nd-round 72; would be 1st MC since 2015 PGA Championship (ESPN…


Golf: Tiger Woods (+5) and Jason Day (+4) both in danger of missing cut through 13 holes at Farmers Insurance Open (ESPN) …


Interesting idea I've observed for indoor #golf #marketing - create meetups so folks can get together at your place around a common interest


Golf Video: Tiger Woods opens Round 2 of Farmers Insurance Open with inaccurate drive that goes way right (ESPN) https://t.co/6AQ26P3J1m #…


Golf: Tiger Woods (+4) tied for 133rd as he tees off in 2nd round of Farmers Insurance Open; top 70 and ties make cut (ESPN) …


Thursday, January 26, 2017

Golf Highlight: Tiger Woods struggles on back nine in first PGA Tour event in 17 months; 11 shots off lead (ESPN) https://t.co/6AQ26P3J1m …


Golf Video: Tiger Woods says "I was fighting out there all day" as he reacts to performance in first round at Farmers Insurance Open (ESPN)…


Golf: Tiger Woods shoots 4-over 76 in 1st round at Farmers Insurance Open; highest score of his career to start a season (ESPN) …


Golf Video: Tiger Woods' bunker shot has nice back spin to set him up for par on 2nd hole at Farmers Insurance Open (ESPN) …


Thanks for all the follows. . .liking my #golf twitter style, let's connect on FB Too! https://t.co/zxGTlkiEFH https://t.co/7yX7ny3TwG


Golf Video: Tiger Woods nails tree on first tee shot at Farmers Insurance Open; went on to bogey hole (ESPN) https://t.co/6AQ26P3J1m #golf


Golf: Tiger Woods tees off at Farmers Insurance Open in his first PGA Tour event since Aug. 2015 (ESPN) https://t.co/6AQ26P3J1m #golf


Wednesday, January 25, 2017

Golf Video: Tiger says he "couldn't have asked for a better pairing" than to play with Dustin Johnson, Jason Day this week (ESPN) …


Golf: Tiger Woods speaks ahead of this week's tournament, his first official event in 17 months; watch live in the ESPN App (ESPN) …


The clever tactic 2 #women are using to grow their #startups into successful businesses https://t.co/Js5eLeYetk


TaylorMade - Welcome to the Family, Tiger

https://www.youtube.com/watch?v=lnuglnNNswE

Submitted January 25, 2017 at 09:59AM by DuskytheHusky http://ift.tt/2ksV49s

Golf Short Game Tips For Lower Scoring

Improving at golf can be difficult and it can be easy to get caught up in doing the wrong things that do not contribute to lowering your handicap. Learn some proven and effective tips to help you get better at the game faster.

Golf: Tiger Woods doesn't want just any putter, which is why his legendary stick "The Scotty" returns after 6 years - Jason Sobel (ESPN) …


TaylorMade - Welcome to the Family, Tiger via /r/ProGolf https://t.co/ddzVUOYRgC


TaylorMade - Welcome to the Family, Tiger #golf


Golf: Tiger Woods announces deal to play TaylorMade equipment starting this week at Farmers Insurance Open (ESPN) https://t.co/6AQ26P3J1m …


First Look: PING Sigma G Putters

Post image for First Look: PING Sigma G Putters

Ping Puts the G in Putter

It's PGA Show week, and PING has rolled out a huge new putter release: the PING Sigma G line! I love the names companies come up with for new products. Sigma G sounds cool when you first hear it, but after that initial aural impact, what does that name really tell you?

Sigma is the eighteenth letter in the Greek alphabet. Does that mean that there are eighteen new putters? Nope, there are only sixteen new models, so that can't be the sigma source. It's not for the year either. That would make these the Rho G putters.

Well what about the G then? Best guess is that PING's use of the G ties the putters into the other G products in the PING family. That G in Sigma G is a big G though, so maybe someone at PING is letting us know they are no longer lower-case g's and that this is how we do it.

Let's come back to the name thing later. The important thing is that we have a bunch of putters to check out, and that with the Sigma G line, PING is making a huge effort to offer you a putter that will fit your stroke and help you make more putts through improved putter technology.

“The Sigma G putters represent an exciting new technology that continues our long-standing commitment to engineering putters that feel and look great but perform even better. The combination of the high-grade elastomer and fully machined aerospace-grade aluminum over the entire face delivers an amazing feel and sound. And with improved ball-speed consistency and forgiveness, golfers will make more putts than ever. We’re also introducing several new designs that offer a variety of looks to fit every golfer’s stroke and eye.”
-John A. Solheim, PING Chairman & CEO

Oodles of Models

SigmaG_ModelComparison_v2

Man, I wish that PING had given us more putter choices with the Sigma G line. Seriously, only sixteen models? Or is that nineteen if we take into account the two different colors of Ansers, and the two shaft options on the Kushin and the Darby.

Did I just say Kushin and Darby?

Yep, PING has rolled out a bunch of not recently seen favorites with the Sigma G line. Sure, the old Anser standby is there, but it's been years since we have had a new Tess, Darby, or Kushin.

You may see some names in that graphic that you don't recognize. Don't feel Ping-norant, those are actually new models. You've got a trio of Kinlochs, Tyne and Doon mallets, and a new Ketsch B, minding its own business on the side of the graphic.

No, PING is not just trying to fill up your whole shop with PING putters. If you look a little deeper into that graphic, you'll see that what they have done with the Sigma G line is create a line with an amazingly broad fitting spectrum. The Sigma G line allows you to select a putter that matches your swing arc, tempo, shape preference, and weight preference. The vast majority of golfers will likely find something on that chart that fits. Remember too that PING can customize the length and lie dot color to fit you. Lots and lots of options.

Though I know nothing of PING's plans in the electronic fitting future, imagine how great all of these options would play into the PING putting app. When it launched, the iPING app did a pretty good job of fitting you into one of the five Anser Milled putters. How cool would it be if an updated version could now put you into the correct one of these based upon your swing data? Fingers crossed that something is coming.

Functional Insert Technology

SigmaG_Anser_FaceExplode_Illustration

Here are the quick hits about the Sigma G insert:

  • Multi-layer face design combines a PEBAX elastomer insert (a high energy compound) with a milled 6061 aluminum face to provide a softer face that delivers consistent ball speeds.
  • The new True Roll Face Technology covers the entire face to provide confidence and full-face forgiveness. Precision milled from 6061 aerospace-grade aluminum, the new pattern varies in depth and pitch to improve performance and touch on putts of every length.
  • Contrasting full-face insert aids in alignment and set up.

The Sigma G features the same face milling pattern that we saw with the fully milled Vault line, but this time around we are looking at a multi-material polymer and metal face. PEBAX may sound like an antibiotic, but with it, PING is trying to help you get the ball to the hole. The TR grooves allow you to hit it wherever on the face you want, and the distance will be the same. The new polymer has allowed PING to nearly max out their feel scores during internal testing.

True Roll milling patterns look very similar to those found on the Vault line from last summer. Vault Anser 2 on top.

PING Sigma G Extras - 2

The different models definitely roll the ball a little differently. I've had the chance to roll three models, and without a doubt, the new insert has a different tone and feel depending upon the shape of the head. The balls make different sounds at impact, and the rolls were of varying vigor.

Of course, the head weight of the putter will also impact the characteristics of the roll, and this is again where the Sigma G line shines. You have light heads in the 340g range, and the weights increase from there up to the 400g counterbalanced behemoths.

Pick the head weight that rolls the ball the right distance for you, and the True Roll Face Tech will help you to roll the ball that right distance regardless of face wandering. If you are still missing putts, that's probably on you.

A Closer look at Sigma G Anser

PING Sigma G Anser - 1

PING Sigma G Anser - 2 PING Sigma G Anser - 5 PING Sigma G Anser - 4 PING Sigma G Anser - 6

I've got a couple of the Sigma G models in hand, including the iconic PING Anser. When I talked about the Vault line last year, I made the bold statement that the Vault Anser 2 was my favorite Anser 2 ever. I still hold that putter up as my favorite Anser ever, but the Sigma G is quite pleasing to roll as well.

If you get the chance in your local shop, roll the Vault Anser 2 side by side with the Sigma G Anser and you'll get an idea of the difference in feel between the fully milled Vault and the metal/polymer Sigma G. I feel a little more thunk with the Vault. The Sigma G, more soft pop. Overall, the multi-material Sigma G provides a softer impact experience.

If you are an Anser player, you are likely already planning on rolling balls with this one. I'll bet that you will not be disappointed at all.

A Closer look at Sigma G Kushin

PING Sigma G Kushin - 2

PING Sigma G Kushin - 3 PING Sigma G Kushin - 4 PING Sigma G Kushin - 1 PING Sigma G Kushin - 5

When I first saw the list of available models, the Kushin was the one that immediately grabbed my interest, even more than the Ketsch B, and that's saying something based on Ketsch Most Wanted dominance.

I was pushin for the Kushin for a couple of reasons. First, I had an older version, so the nostalgia bug got me a bit. That Kushin had toe-up hang before toe-up hang and torque balance was cool! (Assuming it is now actually cool.)

This Kushin actually is face-balanced, but PING can build it for you with a straight or slight arc shaft, so the hang does not totally dictate fit. I've been rolling the slight arc version and it fits my swing as expected.

The second reason that I was excited to roll the Kushin was its compact and wide blade shape. I'm definitely a member of the wide blade cult. I love the look of the head and thick top line at address. The problem is that other companies who currently make such a head, cough-Odyssey-cough, are making very visually busy versions of the shape. The Kushin is visually clean.

It's also a cannon. The impact with the Kushin rings far more than the Anser or Doon, and the ball just launches. Maybe it's the 20 grams that it has on the Anser, tough to know for sure, but the Kushin brings the hammer. Distance is by no means erratic, just consistently longer.

A Closer look at Sigma G Doon

PING Sigma G Doon CB - 1

PING Sigma G Doon CB - 2 PING Sigma G Doon CB - 3 PING Sigma G Doon CB - 4 PING Sigma G Doon CB - 5

The Doon sits up in the upper corner of the PING Sigma G fitting chart, and I thought it would be a solid pick to round out the sampling of models. It's a heavy tyke at 400g, but the weight is countered nicely by the extra mass of the 38" shaft.

Though I'm not a counterbalance guy, I can see the attraction. The Doon is so stable as it swings. It takes some getting used to, but once you do it really puts a smooth roll on the ball.

PING came so close to nerd-gasm awesome with the name of this one. Tweak the spelling to Dune and you have all kinds of giant worm references as well as hundreds of others from that desert fantasy universe.

Change the "n" to an "m" and you are now rolling the new Doom, PING's version of the BFG.

Grips and Such

PING Sigma G Grips - 13

Though companies like SuperStroke garner most of the grip fanfare these days, PING has made some grips in recent years that really should be getting more attention. The PP60, one of the stock grip options for the Sigma G line, shares some geometry with the SuperStroke Flatso, but the overall shape and the texture give the grip a unique feel. Should you want something a bit larger, the PP62 is also available.

Even if you are not looking at a new putter, you should put PING grips on your radar. If you are planning on regripping your putter this year, check out the PING grips when you are shopping around. They are really good. That PP62 looks a little dirty because I have been using it a bunch. It's on the Vault Anser 2, and it adds to the awesome.

Pricing, Availability, and the Name

The U.S. MSRPs for the Sigma G putters are: Blade-style: $195; Mallet-style: $215; Counter-balanced: $235. Based upon build quality alone, I think that this is right on for the line. If you really want to add options to your putter, an adjustable length shaft can be added for an upcharge of U.S. MSRP: $35. They are available for preorder today, and you can find the Sigma G putter in your local golf shop on February 16th.

As for the Sigma G name, that's really a nod to the fact that these putters represent the sum of PING's putter technologies being present in these putters. You get the new multi-material insert, the TR grooves, and both classic and new head shapes to fit player stroke and weight preferences.

The Sigma G line represents the sum of all of the putter knowledge that PING has amassed, and that's no small volume of putter engineering information.

PING Sigma G Grips - 12 PING Sigma G Grips - 11 PING Sigma G Grips - 7 PING Sigma G Grips - 6 PING Sigma G Grips - 5 PING Sigma G Grips - 4 PING Sigma G Grips - 10 PING Sigma G Grips - 9 PING Sigma G Grips - 8 PING Sigma G Grips - 3 PING Sigma G Grips - 2 PING Sigma G Grips - 1 PING Sigma G Extras - 6 PING Sigma G Extras - 1 PING Sigma G Extras - 3 PING Sigma G Extras - 4